Features:
● RoHS Compliant
● Dual Independent Splice Protection Heaters
● 5.6” Switchable Color Monitor for Front to Back or Back to Front Operation
● Automatic Splice Start
● Automatic Heater Start
● Automatic Fiber Profiling Detection
● Complete Splice in Less than 40 Seconds
● Built-In LED for V-Groove Illumination
● User-Friendly Menu Selection System
● 24-Hour Technical Support via 888-SPLICER

		TYPE-39
Optical fiber requirements	Material	Silica Glass
	Profile types	SMF,MMF,DSF,NZDSF
	Fiber diameter	80 to 150 μm
	Fiber coating diameter	0.25mm	Non-0.25mm
	Cleave length	8~16mm	16mm
Standard performance	Splice loss (typical)	SMF: 0.02dB, MMF:0.01dB, DSF:0.04 dB, NZ-DSF: 0.04dB (With Sumitomo identical fibers)
	Splice cycle time	Approx. 9 seconds (Quick Mode)
	Heat cycle time	25 seconds 40mm sleeve,30 seconds 60mm sleeve
	Splice & heat cycles per battery	Approx. 100 (with BU-66S), Approx. 200 (with BU-66L)
Programs	Splice programs	Max.48
	Heating programs	Max.20
Functions	Loss estimation	Provided
	Splice data storage	10000 splices
	Proof test	1.96N(200gf)
	Automatic arc test	Provided
	V-groove white LED illumination	Provided
Size/Weight	Size	150(W) x 150(D) x 150(H) mm
	Weight	2.9kg (including PS-66)
	Monitor	5.6” TFT color monitor
Power supply	Power requirement	AC operation, Battery operation, Car battery operation (option)
	Battery module	NiMH (10.5 ~15V)
	AC Input	100V ~ 240V (50/60Hz)
	DC Input	DC12V [for PC-V66 (option)]
Terminals	DC output terminal	DC-12V ( for JR-5/JR-5B)
	USB port	USB 1.1 type-B
	Video output terminal	RCA jack NTSC
Operating temperature		-10℃ ~ +50℃